ucplus Server Information

Minimum Version Required:


Installation Notes:

To perform an installation you will need: 1) IP address of the telephone system, 2) the IP address of the CSTA server (if different), 3) the CSTA username and password, 4) the range of trunk numbers.
For directory download, SNMP should be configured to provide access for the UC Server PC's IP address to Read Communities 'public' community name. (on the PBX > Expert > Maintenance > SNMP >

Directory Download:



Unify OpenScape Business X1 is not supported, it does not support the UC Booster card or Server.

Internal hold IS supported (unlike 3000 series).
Call direction and/or dialed number may be wrong in some call pickup scenarios.
Handsets are not detected as offline if unplugged
Add trunks through configuration.
Internal consult transfer calls do not update the extension numbers.

Connection Information




A UC Booster Ocab card or UC Booster server is required for the hardware based OpenScape Business. If using the software based PBX this is not required.

Firewall Requirements:

Main IP port 8800

PBX Information


Configuration of the telephone system is performed the HTML interface.

Driver Requirements:

None required

Other Requirements:

A CSTA username and password needs to be configured. SNMP needs to be enabled for the server's IP address.

WAN Connectivity
Directory Support
Trunk Monitoring
Analog Phones
Agent Features
Call Tracking Support
CLI Retention Support
Type Make Call Hang up Answer Deflect Blind Transfer Supervised Transfer Hold Pick up Send DTMF Call Fwd Dialback
Unify Handset