NEC SV8100
ucplus Server Information
Minimum Version Required:
2.4.0
Installation Notes:
To perform an installation you will need the IP address of the PBX.
Directory Download:
Extensions, Trunks
Advisories:
Only one application can connect to the TAPI interface at a time. If another computer is connected, then the connection will fail.
This PBX is end of support from NEC March 2019.
Connection Information
Type:
TAPI
Requirements:
3rd Party TAPI license
Firewall Requirements:
TCP: 8181 (default)
PBX Information
Architecture:
This PBX has bee replaced by the SV9100. The NEC SV8100 connects directly onto the LAN through the connector on the CPU card. The local IP address and other network settings are set through either the Administration program or the HTML-based programming interface. A reboot of the PBX is required to implement a change to the LAN configuration.
Driver Requirements:
Included
Firmware Requirements (for new installations):
IP1E-NTCPU
Other Requirements:
A 60 day trial TAPI license may be available
| Type | Make Call | Hang up | Answer | Deflect | Blind Transfer | Supervised Transfer | Hold | Pick up | Send DTMF | Call Fwd | Dialback |
|---|